All Activity

Hi. I've gone the other way, A4 40Tfsi to Q5 45Tfsi. I found that around town, I would get high 20's & into low 30's in the A4. On the open road, on a decent run & not caning it, I could get mid to high 40's quite easily. I did see 50+ on a few occasions, but that was quite rare. Significantly better than the Q5, although I have seen just over 40 from the Q5 once or twice.

I didn't have time to strip things down and check yesterday as I'm working nights for a couple of shifts now. Now I know what I'm looking for though I should be able to tell if the EGR valve is missing a pipe without too much faffing about.

did a 70 mile run and since the warm weather all ok

I'm thinking of buying a Audi a3 2.0 tdi manual or automatic dsg and just wanted to know if they are reliable I've bin told there not as reliable in comparison to the other engines and wanted to modify and remap the engine. Just wanted some thoughts and opinions on what engines are the best for doing so

i have one and cracked app so i get all settings

all good with my S1

posted a update, updated and a video done

new one i just got as going to add usb to back Universal Black Car Armrest Console 1 for X3 X3 1-48 cm Durable ABS Material - AliExpress 34

That sounds plausible. What is the other end of the hose connected to?

i have one and a replacement i just got Universal Black Car Armrest Console 1 for X3 X3 1-48 cm Durable ABS Material - AliExpress 34

No. The noise is always worse when turning because the balls have to move further in their tracks.

do a hard reset and see if helps

stop start fault is what i got from low car battery and the sensor on my post here

Where have you looked?

IMG_4156.mov Short clip with noise IMG_4156.mov

Oh for sure… never realised the originals were pretty much knackered (apart from the rust) but the new ones open/close si much nicer.

Hopefully this may help some people

Morning all Does anyone know if the audi s1 (2015) has the lock/unlock from door handle? as states in the book should have it, but it just looks color coded blanked

Hello I thought I would ask on here about catch can set ups. I've seen. Some pictures on Google of them set up with the fitting for the pcv deleted on the inlet manifold above the y pipe . Does anyone have any close up pictures of there set ups please

After a lot of research tonight I'm thinking someone in the past has deleted the EGR valve, anyone able to confirm this may be the case?

Thanks Hamza , was it 2 joints or 1 you had to change ? As you could hear it when you turned both ways . Like I said I have no rips in the boot but defo a clicking sound intermittently, seems to click when I turn left but not everytime , I really notice when turning left and accelerating out of a junction . I thought the click would be there all the time if my CV was in trouble?

Hi guys got an odd issue. My cooling fan stoped coming on when it get up to temperature no codes and the test function on my obdeleven seems to show that the fan itself runs fine it over heats but the temp gage dosnt go over 90c i recently replaced it aswell as the outher temp sender and the ac presure switch (the presure switch was falty but i didnt have a tool at the time so i replaced all the sensors) any advice should i put the known working temp sensors back in or could it posibly be anouther issue

I forgot to say, it obviously looks like it's been deliberately blanked off by someone other than Audi but what is it and what purpose would blanking it off serve? I'm a little concerned I may be causing damage to the engine in the long term running it like this thanks to someone's half assed repair/mod.