Rear Calipers. Help needed urgently!!!

[Itsa6carguy]

Help guys!

right so thought I’d change the rear pads on my Audi. So I borrowed a Sealey OBD tool from a friend n started working on it.

stupid mistake I made was that I didn’t release the Park brake before starting the job. Anyways after messing with the obd tool I ended up pushing the piston out! But before it came all the way out I managed to stop the system. Now I can’t get the Caliper to make the piston back in, and now have a fault with the Park brake highlighting the Caliper I was working on!

please help a guy who thought he he could fix brakes and control my kids at the same time from completely messing up the car!

[WPAWS]

@niedzial1983 Piotr can you advice Sunny?

[niedzial1983]

So you have done the change and the car is driveable? 

Is the obd tool for vag cars ? . You need something like vcds, obd11 or carista . 

Or a little trick there you connect epb motor to 12volt and revers + and - to wind in the piston 

[Critical_mass]

Im in Leeds and have VCDS AND did the rear brakes for the first time last weekend. 

 

 

[Critical_mass]

and by luck i have the laptop on me at work. Where in Leeds are you?

[Critical_mass]

@Itsa6carguy still need help?