S8V10 d3 crank oil seal ,which supplier???

[Tom V10]

Hi,new here. Just bought this beast of a car and looks like inherited this leek! Any mechanics on here carried out this seal repair before? My mechanics asking ,in case there is a slight groove on the crank 

Shaft end,does anyone make an oil seal at a different depth (repair seal,if such a thing) so as not to seal at the grooved point ?? Look forward to your replies 😊

[Magnet]

Hello Tom,

I would have thought the leak would be very severe if the seal had worn a significant groove in the shaft. I can see where you are coming from regarding a wider/thicker seal, but generally these seals deteriorate and become far less efficient sealers due to the seal hardening. Providing the crankshaft front bearing is not excessively worn - causing the crank to rotate out of true, or indeed have thrust bearing wear which can result in the shaft moving forward and backwards,  a new seal should accommodate a small amount of possible rotational wear where the original seal lip sat. Well worthwhile ensuring you buy a good quality replacement seal - even from a main dealer, since the on cost over labour charges would be small. 

Kind regards,

Gareth.

p.s. Perhaps the car came from Wales if it  came with a leek! 

[V10 Tom]

Hi, and thanks for the reply, sorry taken me so long to reply. Only just got her all back together this weekend, replaced idler/tensioner/waterpump/suspension compressor/all 8x suspensionarms /serpentine belt and the main reason, the crankshaft seal.  My mechanic has been great. I still seem to have a leek , (not a Welsh one tho🤔😂).

It does look to be coming from the same area !!!

He tapped the new seel in using a large socket on the back of the old seel. It did look seated well. Any 💡 ideas? 

[Magnet]

Are you the same poster as TomV10?

If so, I wonder why you are now posting under V10 Tom and not including any other information under your profile.