Jump to content


Recommended Posts

Posted
9 hours ago, S-Line said:

Yes Tommy. You appear to be missing little flat black panels that hide whatever is behind the vents. 
CDE5F945-9236-49B2-8FD9-4F3187F6125E.thumb.jpeg.d54d1130f0b555990487268b623e3dda.jpeg6AF74A86-E734-43C0-9EFA-CA300F03B65D.thumb.jpeg.093fe5a7702d2a9c89b8df47d04ed4a2.jpeg636FF103-903E-4115-896B-66D9FAD271C7.thumb.jpeg.2f6965dd613409fff782b0d0933bea45.jpegB8EB6774-E3D2-409E-AC79-A269E3C6C293.thumb.jpeg.f22d90b364941c6cd97b69cb36ae4d70.jpeg

Cheers for the assist. Ordered the part today for €10


Posted
2 hours ago, gsmdo said:

Epic job on the bodywork 😃👍 I always think silver is one of the most difficult colours to make look shiny - you've certainly managed that!

Quick question - did you throw out the old faux-aluminium trim? If not, what sort of condition was the driver's door trim in (mine's a bit scratched)?

Hi Mike, I still have all the bits. There are a couple of seat belt marks on the drivers one but I'll grab a pic of it in the office tomorrow and see if it's better than the one you have

Posted
7 minutes ago, tommyboy40 said:

Hi Mike, I still have all the bits. There are a couple of seat belt marks on the drivers one but I'll grab a pic of it in the office tomorrow and see if it's better than the one you have

Thanks Tom - it’s not a big thing, but I’m sensing you’re as particular about your car as I am… 😁

Posted
Just now, gsmdo said:

Thanks Tom - it’s not a big thing, but I’m sensing you’re as particular about your car as I am… 😁

The OCD is strong with this one! I'm in the middle of gluing back on some clips which were damaged by whoever installed the last phone/aux kit.

 

  • Haha 1
Posted

Do you want any of the other trim? The gear surround and ashtray are in fantastic nick

Posted
14 minutes ago, tommyboy40 said:

Cheers for the assist. Ordered the part today for €10

That’s good. 👍

Wow that’s cheap! Genuine from Audi or breakers yard? Don’t think Audi do anything for a tenner. 🤣

Posted

No - all good except for the driver’s door trim…😆

Posted
11 minutes ago, S-Line said:

That’s good. 👍

Wow that’s cheap! Genuine from Audi or breakers yard? Don’t think Audi do anything for a tenner. 🤣

From the dealer. Picked up a cabin air filter, the 4 spring clips which hold the boot lock trim in position, and the trim for €45

Posted
2 hours ago, tommyboy40 said:

From the dealer. Picked up a cabin air filter, the 4 spring clips which hold the boot lock trim in position, and the trim for €45

That’s impressive for that lot. 
Would’ve been a lot more In the UK I’m sure of that. Cost me £25 from the dealer for just 4 screws for the under tray. 🤦🏻‍♂️

Posted

When I got the car it had a Nokia phone kit and a wired aux in for music but I wanted something much better so that I didn't have to plug in my phone like a savage. I bought this Dension unit, there is a better one if your car has MFSW but mine doesn't

 

 

IMG_1590.jpeg

Posted

First job was to remove the frankly horrendous mess behind the dash. The Dension kit comes with a harness so needs no cutting.

IMG_0003.thumb.jpeg.fc537a242c2b35d5b1a394ef42cb68c8.jpegIMG_0158.thumb.jpeg.50065ef10f9a4c0e69b179b3a8c780f9.jpegIMG_0159.thumb.jpeg.f284256d48e707631e3be4d6959f6244.jpegIMG_0160.thumb.jpeg.a07c456aae2bfb6166a7addef6deff82.jpegIMG_0161.thumb.jpeg.9b878974c5a71363952f8e2ab7f9e3d0.jpeg

Posted

You have certain control from the stereo and it's 100 times better than what was there. I did this in April and didn't fit the mic as it would necessitate removing the trim around the windscreen and it was too wet. I pulled it all off yesterday and found that the person who did the earlier install had broken some of the clips and seriously bent the metal spring clips. I was able to bend the metal to an acceptable  standard and re glue the clips with Gorilla glue. If you haven't used this before, it's simply the best available for gluing trim clips back on. A little water to activate and a clamp or two to help it set.  Removing the glove box was a little tricky because my car has the cool box/ fridge and there is the AC vent in there which needs removal. You need to reach in and unscrew the vent.IMG_1586.thumb.jpeg.0132e22e5228d3bc298f900753997856.jpegIMG_1587.thumb.jpeg.fc793994c194702cd54be517971689d8.jpeg

 

Posted

Since I had the new pollen filter, I pulled out the old one and replaced it. It's a 10 minute job. Check out the difference

 IMG_1588.thumb.jpeg.28077b17cc43d7adbe40541b850d13eb.jpeg

 

There is an arrow to indicate the airflow direction 

 

IMG_1589.thumb.jpeg.513f5bda65eae46f9b64659d9efac16a.jpeg

And finally, the part number in case anyone needs one

IMG_1591.thumb.jpeg.e46613445b66940ad54c73ba98941d34.jpeg

Posted
On 7/8/2022 at 10:09 PM, gsmdo said:

No - all good except for the driver’s door trim…😆

Here's my drivers side trim. It does have a couple of marks but it's yours if it's better than yoursIMG_1683.thumb.jpeg.6ac976222d32be8f1629642a8b69cc85.jpegIMG_1687.thumb.jpeg.71666575366b25effaf1b31b1e358bee.jpegIMG_1685.thumb.jpeg.afbaf69bf094f650b13b33c788ca5e35.jpegIMG_1688.thumb.jpeg.43cdf56c452ac05286a1e83acdb4eb0d.jpeg

IMG_1686.jpeg

IMG_1684.jpeg

Posted

Each time I open the boot, the state of the gas struts has been annoying me. Decent replacements are only €20 each

IMG_1639.thumb.jpeg.bd41341c8238a88df824efe27d98869e.jpegIMG_1640.thumb.jpeg.f6b0db6009926e818fdda88a87e24c2f.jpeg

 

Fitting the new ones is a 2 minute job

 

IMG_1653.thumb.jpeg.9a627f76b6c6d404ff34d6c3124a5815.jpegIMG_1652.thumb.jpeg.77464e137f52999a2aa0218edadf27b7.jpegIMG_1651.thumb.jpeg.256cb432a53b291416433922b9f6ef27.jpeg

Posted
13 minutes ago, tommyboy40 said:

Here's my drivers side trim. It does have a couple of marks but it's yours if it's better than yoursIMG_1683.thumb.jpeg.6ac976222d32be8f1629642a8b69cc85.jpegIMG_1687.thumb.jpeg.71666575366b25effaf1b31b1e358bee.jpegIMG_1685.thumb.jpeg.afbaf69bf094f650b13b33c788ca5e35.jpegIMG_1688.thumb.jpeg.43cdf56c452ac05286a1e83acdb4eb0d.jpeg

IMG_1686.jpeg

IMG_1684.jpeg

About the same as mine Tom - thanks anyway... 🤔

Posted
12 minutes ago, tommyboy40 said:

Each time I open the boot, the state of the gas struts has been annoying me. Decent replacements are only €20 each

IMG_1639.thumb.jpeg.bd41341c8238a88df824efe27d98869e.jpegIMG_1640.thumb.jpeg.f6b0db6009926e818fdda88a87e24c2f.jpeg

 

Fitting the new ones is a 2 minute job

 

IMG_1653.thumb.jpeg.9a627f76b6c6d404ff34d6c3124a5815.jpegIMG_1652.thumb.jpeg.77464e137f52999a2aa0218edadf27b7.jpegIMG_1651.thumb.jpeg.256cb432a53b291416433922b9f6ef27.jpeg

I cannot believe how clean your boot shut area is... 😮

We may well be cut from the same cloth - I replaced the boot struts on mine as one of the first jobs - simply because they were rusty looking... 🤣😂🤣

Posted
4 minutes ago, gsmdo said:

I cannot believe how clean your boot shut area is... 😮

We may well be cut from the same cloth - I replaced the boot struts on mine as one of the first jobs - simply because they were rusty looking... 🤣😂🤣

I clean all the shuts when I wash the car. It’s only difficult the first time you do it. Keeping it clean after that is easy. It does need another polish, the winter has left it covered in swirl marks. Shame that my trim isn’t any good to you. Have you priced it from the dealer?

  • Like 1
Posted (edited)
2 minutes ago, tommyboy40 said:

I clean all the shuts when I wash the car. It’s only difficult the first time you do it. Keeping it clean after that is easy. It does need another polish, the winter has left it covered in swirl marks. Shame that my trim isn’t any good to you. Have you priced it from the dealer?

I'm pretty sure it's no longer available. It's not something that keeps me awake at night 😆 I keep looking for a set of Carbon-fibre trim from an S4 on eBay... 😎

I wonder if it would respond to T-cut, or simple polish, to take the minor scratches out... 🤔

Edited by gsmdo
Posted
11 minutes ago, gsmdo said:

I'm pretty sure it's no longer available. It's not something that keeps me awake at night 😆 I keep looking for a set of Carbon-fibre trim from an S4 on eBay... 😎

I was lucky to get the wood trim in reasonable condition on eBay. I have some parts arriving on Monday and I’ll enquire about the trim price 

Posted
32 minutes ago, gsmdo said:

I'm pretty sure it's no longer available. It's not something that keeps me awake at night 😆 I keep looking for a set of Carbon-fibre trim from an S4 on eBay... 😎

I wonder if it would respond to T-cut, or simple polish, to take the minor scratches out... 🤔

T Cut won’t do it. A polish would help if you followed the direction of the lines on the trim. Try a cutting compound on a sponge

Posted

So there I was, thinking, "It's about time I did another search for carbon trim"...

Two hours later...

1264761559_CarbonOne.thumb.jpg.b0f579fa82bb45aa0621f4fa9c092798.jpg

468770964_CarbonTwo.thumb.jpg.4ae05927728fd50712166ac97594a900.jpg

429905810_CarbonThree.thumb.jpg.2c2718849ed21e738eba35a5e1fce55b.jpg

2051253371_CarbonFour.thumb.jpg.fd5941f16eb98b2cc562c2e35b83c3d0.jpg

626179159_CarbonFive.thumb.jpg.d96185b38e3e70c9d2387b3d0b9fd07d.jpg

44021590_CarbonSix.thumb.jpg.ab3a43c72ce952d7946cc642e296c274.jpg

The trim around the light switch was the most complex to remove - but YouTube guided the way... 😃

It was expensive, but you can't take it with you. Also, it introduced me to a new VAG tuning shop and breakers over in Fakenham, less than half an hour away...😃

The gear lever surround and front ashtray cover weren't in good condition, but, as luck would have it, I didn't need either, as I have a phone charger hard-wired onto the ashtray and the controls for my aftermarket heated seats on the gear lever surround...

1502455397_CarbonNine.thumb.jpg.323fa9c9e61cf51876f3d1e8c05ab2ce.jpg

(Sorry for the quality of the pic - quite dim in the garage)

So - whilst I had the trim around the headlight switch off, something dropped into the driver's footwell...

1725899366_CarbonEight.thumb.jpg.cf70a264a6b14a0184ee7db0c95f571a.jpg

...(key for scale). I'm unable to see anything missing (and it may have arrived with the new trim)...

1595984420_CarbonTen.thumb.jpg.f6462ba527a83385e6f7accb78a8c48d.jpg

...any ideas?

Apologies for slightly hi-jacking your thread, Tom - I promise I'll shut up now... 😄

 

Posted
1 hour ago, gsmdo said:

So there I was, thinking, "It's about time I did another search for carbon trim"...

Two hours later...

1264761559_CarbonOne.thumb.jpg.b0f579fa82bb45aa0621f4fa9c092798.jpg

468770964_CarbonTwo.thumb.jpg.4ae05927728fd50712166ac97594a900.jpg

429905810_CarbonThree.thumb.jpg.2c2718849ed21e738eba35a5e1fce55b.jpg

2051253371_CarbonFour.thumb.jpg.fd5941f16eb98b2cc562c2e35b83c3d0.jpg

626179159_CarbonFive.thumb.jpg.d96185b38e3e70c9d2387b3d0b9fd07d.jpg

44021590_CarbonSix.thumb.jpg.ab3a43c72ce952d7946cc642e296c274.jpg

The trim around the light switch was the most complex to remove - but YouTube guided the way... 😃

It was expensive, but you can't take it with you. Also, it introduced me to a new VAG tuning shop and breakers over in Fakenham, less than half an hour away...😃

The gear lever surround and front ashtray cover weren't in good condition, but, as luck would have it, I didn't need either, as I have a phone charger hard-wired onto the ashtray and the controls for my aftermarket heated seats on the gear lever surround...

1502455397_CarbonNine.thumb.jpg.323fa9c9e61cf51876f3d1e8c05ab2ce.jpg

(Sorry for the quality of the pic - quite dim in the garage)

So - whilst I had the trim around the headlight switch off, something dropped into the driver's footwell...

1725899366_CarbonEight.thumb.jpg.cf70a264a6b14a0184ee7db0c95f571a.jpg

...(key for scale). I'm unable to see anything missing (and it may have arrived with the new trim)...

1595984420_CarbonTen.thumb.jpg.f6462ba527a83385e6f7accb78a8c48d.jpg

...any ideas?

Apologies for slightly hi-jacking your thread, Tom - I promise I'll shut up now... 😄

 

Delighted you found what you were looking for. You’re welcome to hijack this thread anytime. It’s so satisfying to do these upgrades. In my mind, the car seems to run better afterwards 

  • Thanks 1
Posted

The CF trim round the shift and the ashtray cover would polish up very well. I hope that you took it anyway. It’s not the hardest to hand polish. The wood in mine was pretty scratched 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now






×
×
  • Create New...

Forums


News


Membership


  • Insurance
  • Support