Jump to content


Turbocharger wastegate actuator( code 2565, Circuit high)


kassi
 Share

Recommended Posts

Hello everyone. I got into some trouble after buying a used 50000 km Audi A3 8v. Just after a week i got this EPC and Engine check light when i was driving. EPC light goes off every night and when i go to work again next morning it shows up again. 

 ON IDLE:

Turbocharger actuator voltage : 3.68 -3.71V

Turbocharger wastegate position: 0 -3%

Turbocharger was changed recently by the previous owner. I dont know if they changed the actuator or not but it looks good in condition no rust. 

I recorded couple of Actuator parameters with OBD II Scanner. Driving on highway i let the throttle go (no throttle) around 90km/h suddenly the EPC and Engine Check Light came on(attaching video with it). And the actuator signal voltage went to 4.99v which actually stays at around 3.7v without epc and engine light. After EPC light (seems like actuator position sensor failure) the actuator stays at 0% and i get Poor acceleration. Help would be really appreciated.

 

 

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership


  • Insurance
  • Support