Jump to content


Recommended Posts

Posted

Hello peeps, I'm new to this forum and was wondering if someone can help me with my problem. I have a 2006 A3 1.9TDI (BKC) and since I got it refuses to start. The previous owner said that it needed a new injector. I ran my ANCEL VD700 through it and it informed me that the MAF was shot. I've replaced the so called poor injector, fitted a new MAF, EGR and Gloplugs. When I checked the oil on it, the reading was at the top of the dipstick!!! somewhat smelling of diesel!! I've replaced the oil,filter, air filter, fuel filter and gloplugs. Ran a diagnostics through it again and it said there were no outstanding error codes but car refuses to start. I was wondering if the electrics to the injectors is OK, and can it be tested in car or will I have to remove it. Any help with this problem will be much appreciated. Sorry to go on a bit with my first post!!!


Posted

SHAME YOU MILES AWAY BUD I WOULD HAD LOOK  FOR YOU    GET IT STARTED   KEV

Posted

I'd recommend you contact an auto electrican who can test the electrics in situ. Then you could send any failed parts for further testing 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now





×
×
  • Create New...

Forums


News


Membership


  • Insurance
  • Support