DC64 Posted October 17 Posted October 17 A6 C7 4G 2014 When driving in a straight line, car pulls consistently to the right. On acceleration the car will pull to the right. When driving over uneven surfaces the car will jerk the steering in either direction. Issue is more noticeable at low speed but still present at higher speeds. Slight delay or notch (loose not tight) when turn from one direction to the other. No play in tie rods and all bushings are tight after multiple checks Even tyre thread. No bent alloys. Lower rear control arm + ball joint replaced on left and right Drop links replaced left + right Steering tracked Any ideas as to what the cause is - I am stumped. Initial Final Front Camber Left -1 -0.54 Right -0.54 -1 Toe Left 1.15 0.09 Right -1.06 0.09 Total 0.09 0.18 Rear Camber Left -1.42 -1.42 Right -1.18 -1.18 Toe Left 0.18 0.18 Right 0.18 0.18 Total 0.36 0.36 Max Thrust Angle 0 0
Steve Q Posted October 17 Posted October 17 Have you had a diagnostic check to see if any fault codes flag up regarding the steering rack?
DC7HSE Posted October 17 Posted October 17 43 minutes ago, Steve Q said: Have you had a diagnostic check to see if any fault codes flag up regarding the steering rack? Hi Steve, this is my car the OP created the thread on my behalf. I have scanned the car multiple times using OBDII on 2 different scanners. There may have been one related to steering 12 months ago, prior to the current issuse, which I cleared and has not returned. I am considering buying VCDS just to see if it throws up anything. You suspect steering rack?
DC7HSE Posted October 17 Posted October 17 22 minutes ago, DC7HSE said: Hi Steve, this is my car the OP created the thread on my behalf. I have scanned the car multiple times using OBDII on 2 different scanners. There may have been one related to steering 12 months ago, prior to the current issuse, which I cleared and has not returned. I am considering buying VCDS just to see if it throws up anything. You suspect steering rack? The fault that I cleared was Steering Column Electronics Systems 00895 CCS/ADR Control Unit thanks
audia4b5kev Posted October 17 Posted October 17 FRONT BRAKE CALIPER STICKING BUD HAD SAME BOTHER FREED IT OF JOBS A GOODIN
Steve Q Posted October 17 Posted October 17 Kev does raise a good point. You'll know if it's a sticking caliper as the brakes will feel hotter on the side it's pulling when you stop and turn the car off
DC7HSE Posted October 21 Posted October 21 Thanks for the info folks. Took a look at the discs. No diff in temps that I can tell. Will take off the wheels and check the wear on the pads and also some bushings again as I'm not convinced. Will return with info if I find any.
Steve Q Posted October 21 Posted October 21 1 hour ago, DC7HSE said: Thanks for the info folks. Took a look at the discs. No diff in temps that I can tell. Will take off the wheels and check the wear on the pads and also some bushings again as I'm not convinced. Will return with info if I find any. Thanks for coming back to us. Please keep us posted on how you get on 🙂
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now