Jump to content


Audi S6 C4 AAN dUAL mASS fLYWHEEL


DublinMark
 Share

Recommended Posts


Hello Mark,

Can I take it you are considering a new DMF rather than a secondhand one? 

If new, I would have thought they would have been available from manufacturer LUK who supply replacement clutches. There are other replacemnt clutch component manufacturers, but personally I stick with LUK. You could try on line, or your local motor factors. 

Good luck with it.

Kind regards,

Gareth.

  • Like 1
Link to comment
Share on other sites

Hi Mark...welcome to the Forum

It is always advised to replace the DMF at the same time as the clutch but it should be measured first to see if there is any excess play in it. Usually, they recommend a new DMF for every second clutch change regardless.

Reason for replacement is that it is the labour costs of replacing it if it goes when it could be done with the clutch for no extra cost.

Every case should be judged independantly and it may be that it was replaced previously and also how it has been driven in the past.

Totally agree with Magnet on making sure and LUK is fitted as a replacement...I wouldn't fit anything else.

Also, agree with Brad-B5 with getting several quotes for the job

Let us know how you get on with it

Cheers  Trevor

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership


  • Insurance
  • Support