Joe Leman

Good morning Gareth Clutch needs to come apart and whatever the problem proves to be would wish to fit a single mass flywheel having read so much about dmf ‘s failing Seeing plenty of suppliers for the smaller capacity Audi engines but not the V6 2.7 Hopeful that someone on this site will come up with the answer have had quite a few previous issues resolved on here. Regarding age grounds am in the same category myself having been in Mech Engineering and worked 10 years past retirement age the desire to do it myself is still there but not the ability the box on this V6 is a bit of a lump. Best Regards Joe

Hi looking to find a supplier for a single mass flywheel for 2.7 c6 Have the dreaded clutch judder not slipping but spoiling the driving experience Do not want to fit another dual mass unless unless absolutely forced into it. Regards Joe 👍

Not checked reverse lights will have a look in the morning ! Thanks Joe

Hi all ! Anyone able to throw any light on reversing sensors they have just stopped telling me anything ! Regards Joe 👍

Piotr could you give me more detail with regard to what you mean please ? I do have a mig welder I am presuming you mean to cut the top side of the silencer open and remove what ? Joe 👍

Chris what exhaust system did you end up with ? Would like to give my 2006 2.7 a more sporty sound ! Cheers Joe 👍

Paul just checked in the boot “7GN” so no dpf Thanks again Joe 👍

Thank you very much Paul interesting video ! Will check in the boot as you suggest regarding dpf Joe 👍

Unsure it’s a 2006 2.7 tdi V6 c6 Avant so whatever that comes with !

I presume that’s a catalytic converter !

Hi have an Audi 2.7 tdi @ 84.000mls just had MOT test and a very near miss on emissions it just came in under ! Wondering how next year will be you see so many of these cars with lunar mileage’s dont understand it ! Anyone have any ideas of oil / fuel additives that may help Best Regards All Joe 😥

Piotr thanks for the reply ! Can you explain please how to get out the central vents ? Best Regards Joe

Hi new member looking for guide to swap out A6 Avant 2.7 Hazard Warning Switch need to remove the trim across ignition switch and air vents appears it would come off in one piece but can’t see how it’s retained. Best Regards Joe 😎