Jump to content


Gogo

Members
  • Posts

    15
  • Joined

  • Last visited

Everything posted by Gogo

  1. Ok, after some much time i finely checked the part number and they are all stock. So, only thing to believe is that it come out from the fabric like that and hope that the whole frame can be adjusted later when i have time. Thank You for your help and time.
  2. Thank You Gareth. I think number 2 is not the case here, only if the whole car is perfectly painted after the crash, but still i have not found any record that it was involved in a crash. Number 3 is the one i need to check again even i cant hear anything wrong. Number 2 and 4 could be the case here, but i will try to find the part number on the frame and see if it match to the one that should be installed on the car. If the numbers match then i believe that it is left only to think that it is like that by design. One thing that also came to my mind is that maybe the whole frame could be shifted back, if that is possible at some point. Looking at the pictures of the frame i dont think that it can be shifted back and forward but maybe someone here knows more. Thank You for the compliment, i made a mistake in the tittle but i try my best. I will come back when i see if there is some wear on those bushings.
  3. Or if you can point here what the part is that you are saying. I know that this is form a quattro but maybe the part is the same on both versions. Thank you.
  4. Hello Gareth. To answer you question, yes, the car was like it is now since i bought it. The difference is only that now it started to bother me because i wanted to lower it for the better look because i have adaptive air suspension and with vcds i can do that. I work alone on the car but i had no major problems with it. Only regular oil and filter change and that is it. Next are rear disks and pads together with new brake fluid. I will try to see what you mean with "main forward rear links" because english is my second language and i dont know what is the part that you are pointing. After that i will try to find the dimension of original part and the part fitted, maybe the fitted part has a part number and i can see if they match with the part that should be there. It will take few days but i will post as soon as i have new informations. Thank You.
  5. Hi Gareth. Thank You for trying to help me. I bought this car in Germany 2019 and the car had 160 000 km on the clock. The car had no accident record and i have done the paint measurement at VW in Croatia. The paint was in all places the same and they have told me that the car was never repainted. The problem i see now i have noticed at the start but i wasnt sure if it is normal or it is a some kind of problem. The tyres are worn evenly on both sides, and i have never done any alignment on the back, or changed anything on the back. So for me this is how it came. I dont hear any knocking noise and the ride is smooth.
  6. So it is not just me, there is a problem. Just dont know what, because it is the same on the other side. If someone know, help. Thank You.
  7. Hi, i have a Audi A6 S-line 2010 2.7 with stock air suspension. I have noted that my rear wheels are not at center, it is like they are more at the back. My mechanic says that it is normal and he cant find any problem. Now i need your help because i do not think that this is normal. On the picture you can see the problem, that the wheel is like pulled back, and that is the same problem on the other side. The car has never had an accidents . 20231012_172025.heic 20231012_172059.heic
  8. is it possible for water to enter if the tape is not holding it? Right now it was some king of silicone or similar glue behind and it was not easy to remove it. I dont want to put something that want hold it.
  9. Hi, i had to do some aluminum work and needed to remove the sound insulation (some kind of foam) that is behind door panel on my Audi A6 2010 (C6). Now i dont know what to use to glue it back. Has anyone done this before to point me at what glue to use? Thank You.
  10. Ok, thank You. I ordered new pads and discs today.
  11. Hi. I wanted some help with my decision about brake disc and pads. I have Audi A6 2010 2.7 140Kw. My rear brake pads are finished and wanted to put new one. Now when i inspected the disc i saw that the thickness is 20mm. According to the manual 20mm is the minimum thickness. My question is, because i need new pads and the disc is already at its minimum thickness, should i buy new discs or is it safe to resurface these?
  12. I forgot to say that i have no error codes in my car. I have tested it with VCDS software.
  13. Hi. I have a big problem and i need your help. I have Audo A6 2.7 140kw Multitronic 2010 car and the problem is next: Sometimes the RPMs (while i am driving and keeping the same speed, not accelerating) goes to 1320rpms (tested with VCDS) and normaly it should be around 1000rpms. When this happens i need to keep driving the car for about half hour and it will just go down to 1000rpms (again while i am driving). This happens once in a while. If i dont drive the car when this happens until it goes away it will hapen again sooner than if i drive it until it goes awey. I posted a video on youtube (link at the end) also because no one knows what the problem is. I need your help. Thank you. https://youtu.be/hscndyHiUMM
×
×
  • Create New...

Forums


News


Membership


  • Insurance
  • Support