Spock

Cheers Cliff, I fitted the suspension myself and I’m happy it’s seated correctly . I think it may be a defective mount 🙈

Well it had a good soak and still the same . There is a small amount of movement in the anti roll bar bush . Is it a new bar or replacement bushes ? I’m not convinced it’s coming from the ARB though . Still sounds high up like a strut mount ! I’ve replaced both but I’m beginning to wonder if I have a defect part . Any easy way to check the mount ? I know they are a pig to change ! Cheers

I’ll give it a try . Thanks both

Thanks for the reply . It’s back at standard ride height now but could have been damaged by being lowered in the past . I’ll give it a good soak and report back. Cheers

2012 Audi A3 8P1 front suspension creek . I bought the car around 6 months ago and on the whole very pleased with the car . When I bought the car it had been lowered and I would normally not entertain a car like this but it had been very well looked after and drove superb (2.0 TDI sport). I returned the car to factory spec and replaced the suspension . Front -new shocks , springs , top mounts and bearings , drop links plus rear lower control arm bushings . Rear - shocks , springs and mounts . I’ve checked the front ball joints and tie rod ends and no play in those but every time I go over a speed bump or pull on/off my drive there is a creak from the front drivers side . The only thing I haven’t checked are the front anti roll bar d bushes ??? Anyone else experienced this ? Drives in a straight line and the steering is very responsive . Thanks

Yes ,got the heat shrink . Thanks for your help guys

Got it apart today . Two chafed wires and one broken ! Should be able to solder a new wire in . The joys of it 🤣👍

Hi, wiring loom has broken wires in front drivers side door so fob locking won’t work . Is there a replacement wiring harness or repair kit available? Thank you