yay 6

The LED headlights on my A6 C7 do not flash on to high beam when the stalk is pulled towards the steering column or switch to high beam when the stalk is pushed away. The blue headlight indicator icon does come up on the dash. OBD11 comes up with no errors. On OBD11 i went into Central Electrics and did an output test. The screenshots are below: Any ideas on what might bethe problem? Thanks

Phew, that's a relief! Thanks Tigger!

Greetings from New Zealand! I imported this used car from Japan with 116,000 km on the clock. All used cars have to go thru a "compliance check" when they arrive. The workshop replaced the front and rear brake pads, "front bush", "front straight bush" and all 4 tyres. When drving out of the workshop, I noticed a grumbling/grinding sound from the front wheels while turning in either direction at low speed. I initially assumed it was surface rust on the rotors, and drove on home. However, this sound continues, only while moving off from a standstill and turning either left or right. It does not occur above about 20kmh. The workshop (indie) says this is typical of Audi vehicles, but I find that hard to believe. To check this out, I test drove a C7 at a car yard, and experienced the same sound, while at another dealer there was no sound whatsoever! Has anyone come across this issue? Thanks.

Greetings from New Zealand, The screen on my car does not pop up, even when the button by the aircon vent is pressed. The radio and cd player do not come on either, and none of the buttons on the MMI controller light up when pressed. The button for the on-off/volume does nothing when pressed. I have removed the screen and checked for broken wires and all is clear. The fuses are fine as well. I believe there could be an isue with the MMI control box itself. How do I go about removing it, and is there any way of testing it before ordering a replacement unit? I have attached a photo of the MMI unit is situ, Many thanks,