Mario T

Ive seen quite a few like it. I wouldn't say mine was.much worse. For the price of them I may as well change them.

Thanks Magnet, I genuinely felt the photo explained my point. I also didn't have a tape at that point so wanted to give context to my question. I will get onto it. Along with my the driver's window when opened only drops 2-3mm not the full say 10mm

Rear both sides 645mm Os front 660mm Ns front 655mm

Ok I'll get measurements.

I can send a photo. I've seen a few like it on my travels. I just wondered if I got the springs replaced if it would add a bit of height.

Ah right 2 years + pretty much always been like it although it does seem to feel a bit worse IMO

Hi All, I suspect this is a simple answer but wondered has anybody else changed the rear springs on their convertible? I ask as I notice that mine sits lower at the rear albeit level. Now I appreciate it has all the weight of the mechanism for the roof in the rear. Is this just a case of the springs being old.? They aren't fractured as I've checked. Any help/experience would be appreciated Thankyou

To clarify it's been on the car 18months now

The window regulator cable had broken so more for the standard reason to replace if you see what I mean. I was just wondering if anyone else had experienced a similar issue with too small a drop

I wonder if there is a worm gear that could be worn in motor unit?

MMmmm no euro car parts. I can't decide if the switch in the door handle is faulty and not passing enough current maybe. The pulley cable has stretched or the motor/ teeth have worn?

Hi All, My A4 cab has developed and issue. When you open the driver's door the window barely drops now. It used to drop a good 5-7mm to clear the fabric roof. The passengers side is fine. There are intermittent times where the glass doesn't drop at all. There doesn't seem to be too much info on this and wondered if anyone has had the same issue. Would it be the switch in the door handle, the motor or the window regulator.? I did change the regulator 18 months ago and that was fine till very recently. I've seen lots of not dropping or not going up or down but the window opening and closing is fine Thanks Maz

Hi All, Something that's been bugging me for a while. Would I be right in saying that there are potentially 2 bumper types for a b7 sline cab. 1) has the black inserts and a slight lip at the base of the bumper 2) one has a more rounded bumper that has colour coded rail along the centre where the fog lights sit.? Many Thanks Maz

Right ok - touchwood I've fixed it. Hopefully this may help somebody else. I wasn't prepared to give up and so removed the light again. This time I really looked closely at the seals and was convinced the lense was sealed to the bulb unit. So after further inspection on the rear of the unit I noted some tiny hair line fractures almost went unnoticed. The rear plastic moulding of the light must get brittle. It wasn't just in one place. So I glue gunned all the cracks 3 in total and touchwood the lamp after some reasonable rain hasn't beaded on the inside. Thanks Maz

I'm almost ready to give up..... I've sealed the edges of the light 3 times have taken my time. After the recent heavy rain the water is back. I'm at a loss it can't be my sealing as I really took my time. What am I missing is it getting in the bulb holders. Does anybody have any experience please.? Is there another area I need to look at.? I did my Skoda ones and gave them no where near the same care and they've been fine. If not where is the cheapest to get new ones although I'm not ready to give in quite yet. Many Thanks Again Mario

Hi There, I recently viewed an A5 convertible that needs a few things. Amongst these when I viewed were 2 noticeable wear marks that happened in the same place around 2 inches from the rear window. It's annoying as the rest of the roof is basically spot on. I have added some photos. It's only the canvas and I'm not convinced it's even through to the rubber shell. Does anybody know if you can spot/patch repair areas and does anybody have any experience of this.? Is it a common fail place and would anybody know why it's done it.?. Your help would be much appreciated. Many Thanks Mario

HI All, It's getting towards those 3 days of the year when I may be able to let the roof down. Over the Easter weekend, I decided to clean and restore the roof. Would anybody know whether it is ok to apply Fabsil over the top of the Autoglym sealer I have just used today.? TBF I kinda messed up the Autoglym as I applied the sealer to a just damp roof. I think the way Autoglym works is it requires the water still on the roof and reacts and spreads with the water. Anyway Fabsil works differently and requires a totally dry roof. So I was thinking of brushing on Fabsil tomorrow as an additional coat to the Autoglym sealer. As always your help is much appreciated.

Thanks Steve is it easy to get the code form VCDS.?

Hi There, I've just bought a new xtron radio but before I change it could I check whether there is a radio code required from the original radio.? I know on my Skoda providing I fit the radio that came with the car there isn't.??? If there is code can I get this from VCDS before I swap it out.?.? Thankyou

Yeah I think that's a job for this weekend. I'll buy some good mastic and spend a morning getting it right. I just can't see where water would be getting in.

Hi Magnet, it's a good point. I will remove and dry out this week. Is there any known water ingress areas on this cluster type.? Thanks

Hi All, Another problem to solve. After many days of rain and dampness outside I've noticed that NSR light has water beads internally. Clearly, there is water getting and I wondered if anybody had a fix for this.? I removed the light recently, cut an old innertube into large washers, and replaced the light bulbs. TBF if anything it's got worse...... I did run a bead of mastic around the outer groove of the lens but I suspect it hasn't set very well due to the weather. Is there any goto trick that anybody has out there or am I chasing shadows with this attempted fix. As always your help is greatly appreciated.

Hi Steve, I got it working. Within the door card there is the main wire that connects everything. I did read something on this earlier. Something to bear in mind as I'll definitely take it with me. The plug has that up and over type lever that pulls the plug into the body of the module. I did this and clipped it in. However after wobbling it the passenger window worked I wobbled again and I felt it 'seat' I tried the drivers window and it worked. Literally didn't do anything else. Scary really as I was about to buy one of everything. It must have been where I kept unclipping it to lower the window to adjust. I realised today I didn't need to do that as there are 2 access holes cut in the door when the window is fully up. You can do all your adjusting here without the door card even attached. Just close the door let the window lift and gauge the height. If only I'd known that yesterday I'd have been finished yesterday and probably not excessively connected and disconnected the plug.