thatukguy_james

the max you can use is 64gb, higher than that is classed as a sxcd card

just a update, a few weeks looking around and still cant seem to get a idea on how to turn it down so far nothing has gone off for a while

hi all all scanned and not one error.

Hi all So for the last few weeks from heavy rain, my car alarm has been going off. I even tested with locking car and putting a bucket of water over the car and it went off. I have a OBD11 and looking around i see others have had the same problem. I would like to turn the sensors down a bit via long coding or obd11 some people say Module 38 on audi vcds. any one done? guides? thanks

brodit do some 🙂

this can be turned on via the hidden red or green menus . tested it a few weeks ago on my s1

i got one of ebay for £50 , does the job https://www.ebay.co.uk/itm/252833133345

Prob will just leave as is 🙂

I used Audi retrofits the other week, was a few hours to install. but is over £500

Hi all I got my S1 about 2 months ago and for some reason the car alarm has gone off twice in the middle of the night ( reported by my neighbour ) Is there any way to see what caused it? I have the OBD 11 tool and app At present I can only think was a sticky phone holder rubber thing that keeps falling off, but the alarm cant be that highly set ? any ideas? many thanks

Afternoon all, So i enabled via the green menus the oil level and battery level as per guide: https://www.youtube.com/watch?v=yhfKl-1lDMI but when i go to car and info, oil is grey did i do it wrong?

if wires are there, i would just buy them and turn on via ode like i have done on some fords? not a biggy, also it seems i have the last update for my mmi?

i only seem to have one fog light on the left side of the main switch, unlike a girl at work that has 2 on her normal a1 as you can see nothing in lower grill

Help it helps, still trying to do a few myself and cant for the life of me get the dip on back up on my a1 to work 🙂 says i need pro Horn When UnLocked Select Control unit 09 (Central Electrics) Control unit Long Coding Byte 5 Bit 4 Activate Activation of Audi Parking System Select Control unit 10 (parking aid) Control unit access authorization - Select function 16 Access Code 71679 Control unit coding -> Seçim function 07 Byte 0 Bit 2-3 (08 visual display active (BAP NEW) selection) Adaptation Select "Visual display for park assist" New Value: OPS Display Shot Down Warning Tone for Parking System Select Control unit 10 (parking aid 2) Adaptation Select "Park Assist activation tone" New Value:off (default: on) Park Assist Activation Speed Limit Select Control unit 10 (parking aid 2) Adaptation Select "Switch-off speed of parking assist" New Value: Choose value between 0 km/h - 20 km/h (default: 10 km/h) MMI Music Sound Reduction with the Parking System Select Control unit 10 (parking aid 2) Adaptation Select "Audio reduction request" New Value:on (default: off) Parking System Varning Tone Frequency-Front Select Control unit 10 (parking aid 2) Adaptation Select "Speaker frequency for the front Park Assist" Select Value Between "Stage 1- Stage 9" Parking System Varning Tone Frequency-Rear Select Control unit 10 (parking aid 2) Adaptation Select "Speaker frequency for the rear Park Assist" Select Value Between "Stage 1- Stage 9" Start/Stop Activation-Deactivation on FIS Select Control unit 17 (Dashboard) Adaptation Warning light for Start / Stop Value to "off" position (default: on) Seat Belt Warning Select Control unit 17 (Dashboard) Adaptation Select "Deactivate seat belt warning" New Value "yes" (Default: no) Hill Hold Assist Activation Select Control unit 03 (brake / ABS) Control unit coding Byte 16 and Bit 0 Activate Adaptation Select Berganfahrhilfe Adjustment: 0 = Berganfahrhilfe "Normal" 1 = Berganfahrhilfe "Early" 2 = Berganfahrhilfe "Late" Pointer Test Select Control unit 17 (Dashboard) Adaptation Select Channel "Staging" New Value:Active Adjust Consumption Indıcator Select Control unit 17 (Dashboard) Adaptation Customize consumption indicator Basic Değeri 100 Value change 85 (%) and 115 (%) . Enable Mirror Heating Select Control unit 52 (Türelektr. Beifahr.) Control unit Long Coding Byte 04 Bit 0 Deactivate Select Control unit 42 (Türelektr. Driver) Control unit Long Coding Byte 04 Bit 0 Deactivate Folding Mirror when Doors Lock Select Control unit 42 (door Electrical driver) Control unit Long Coding Byte 4 Bit 6 Activate Control unit 52 (door Electrical front passenger) Control unit Long Coding Byte 4 Bit 6 Activate Activation of Headlight Wash Select Control unit 09 (Central Electrics) Control unit Long Coding Byte 20 Bit 5 DeActivate Rain Lighting Select Control unit 09 (Central Electrics) Control unit Long Coding Subsystem: Select RLS (rain and light sensor) Byte 0 Bit 1 DeActivate Activation of Tire Pressure System Select Control unit 03 (ABS / brake control unit) Control unit Long Coding Byte 16 Bit 1 Activate Emergency Break/Flashing Lights Select Control unit 09 (Central Electrics) Control unit Long Coding Byte 16 Bit 1 Activate Bit 2 Activate Enable-Disable DLR on MMI Select Control unit 09 (Central Electrics) Control unit Long Coding Byte 15 Bit 7 Activate-This is a hidden bit. You have to direct edit. Disable DRL with Hand Break Select Control unit 09 (Central Electrics) Control unit Long Coding Byte 11 Bit 0 Activate-This is a hidden bit. You have to direct edit.

can close, got one 🙂

HI ALL, Picked up a nice S1 on Monday and have a few question I wonder if anyone can help with. (added some pics) Has the power mirrors, cup holders in rear seat? (not seen that before) and it seems a few upgrades like heated seats, parking sensors and Bose stereo The car doesn't have front fogs. Would the wires be there and I just have to put them in and enable by OBD? also get the new light control unit to pick front and rear fogs? I got a OBD11 this week, I read i can enabled dip the mirrors on back up. Anyone done? Would also like to open the hidden menu on the mmi, that can be done as well? green/red menus? I read i can update my MMI just by sd cards and a download, but i looked for a few hours and cant find a list to confirm i can update mine. The version is HN+_EU_AU210_K0900 I was told this is chain system/belt, so as long as oil changed every 8k, this should never need to be changed. True? would anyone say to just get done ? (car has done 90k) with loads of parts and oil servicing to back it up.

loads about with a few secs look on google. https://www.oem-mounts.com/product/audi-a1-s1-2010-2017

I hope everybody's having a good weekend I'm in the market for a Audi S1. ideally looking for something that is stage 1. ideally looking for something with heated seats. bonus if it has the Bose system and low mileage with service history maximum price £13,000