Jump to content


Dale 01

Established Member
  • Posts

    24
  • Joined

  • Last visited

Everything posted by Dale 01

  1. Ok thankyou Cliff
  2. Hi Cliff I was told on here that some A3's are like that (but i have never ever seen another one) and that the bulbs are on an 8 volt supply and when you put your foot on the brake it switches to 12 volts and the bulbs glow brighter (as brake lights) and the same for the fog lights as indeed they all do The car did pass the mot test with these in February. But what i dont get is that if the car has led at the rear then the rest of the lights should not be on unless i brake or use the fogs. Thanks Cliff Dale
  3. Hi Steve Well she's fixed and runs like a brand new car, I had to bite the bullet and ask an Audi mechanic for help who is actually a good friend, he took the car in his garage for a diagnosis and found a number of issues, firstly the inlet manifold was leaking and sucking in air and moisture then the new coil pack i fitted was faulty, the injector seals had gone and a wire to injector number 2 was corroded, which is quite common im told, the whole bill including the diagnosis was £300 which I think is great, as they say it always pays to know someone in the trade, she now runs really smooth and idles perfectly 👌 I have no lights on the dashboard which is great to see, now I can concentrate on the lights, im sure the person or the person before him have played around with something to do with the lights as the rear lights are LED but the whole light including the fog light are on and the front the indicator lights are on (pics included) he's put resistors on both headlights so that i get corner lights, to be fair I'm not that overly concerned with the front it's the rear lights, I just want them working as they should, any suggestions would be greatly welcome. Thanks Dale
  4. Hi Steve That was my next investigation, would I need a computer to turn off ESP light or do simply change the wheel sensors. As always I'll keep you in the loop. Cheers mate Dale
  5. Hi steve As per earlier conversation,. I changed the throttle body for a new one and it got worse so we put the old one back on, ive recently changed the coil pack as the old one was corroded and also change the leads for new ones, it still runs a bit lumpy so i put a new MAP sensor on the engine but to no avail. It still hunts when im sat at lights etc also the ESP light is on now and ive been told that the ESP also controls the throttle. Any more ides mate. Thanks in advance Dale
  6. Hi Steve Still haven't forgotten about keeping you informed but my friend still hasn't gotten back to me yet but we have both decided that a new throttle body is the step forward As before i will keep you informed Dale
  7. Hi steve Ok thanks for the info, I will keep you informed with the progress Dale
  8. Hi Steve Sorry to bother you again but do you know what this is on the engine that i have circled in blue, it has a pipe from the air filter box and electrical wires coming out the back. Thanks Dale
  9. Hi steve I have a friend who says he's going to reset the throttle body on sat afternoon. I had the EPC ( Electronic Power Control ) light come up on the dashboard snd when I looked it up it said that it indicates a problem with the vehicles throttle system which could include the accelerator pedal, fuel injection throttle body. I'll keep you informed Thanks Dale
  10. Hi Steve As promised here are some pictures of my engine. Dale
  11. Hi Steve My car is petrol and does not have a turbo. I've been reading other posts similar to mine on here and it seems that my car does not have a MAF, which i find hard to believe,. Im going to renew the spark plugs and leads at the weekend. I took the throttle body off and cleaned it but to no affect. Baffled, I am. I will post pictures of my engine very soon. Dale
  12. Hi Steve I believe this to be the case. I have a 2008 1.6 8v a3 sline and have looked for it countless times ive had the pipe off between the filter and the throttle body and there's nothing there, my car is idling badly and i want to change the throttle body but Autodoc Sent the wrong one and also change the MAF if I can find it. Thanks Steve Dale
  13. Hi Jason Haven't got back on here as im still waiting to send the throttle body back to Autodoc. They have to be the worst company to deal with. Whilst im on this subject, do you know where or if I have a MAF sensor. Thanks Dale
  14. Hi Jason The Spec is, Audi A3 1.6 8v 58 plate S Line Thanks Jason i will watch the video and get back to you Dale
  15. Hi I'm changing my throttle body for a new one, what I want to know is, are they plug and play ie already set up or do you have to "tune" them in. I read that you can do this by turning the ignition on, not starting the engine, and hold down the throttle pedal for 15 seconds then turn the ignition off and then start the car and it should be done. The reason im changing it is because sometimes it doesn't idle properly and other times it goes into limp mode with the ESP warning light coming on, I have to turn it off then turn it back on to clear it. I've had it on a machine and it threw up some codes, pic included. It has a factory recall on it but Audi's wont touch it until all problems are fixed and to be honest i cannot afford their prices. Thanks Dale
  16. Hi Jason Thankyou for clearing that up for me as i thought because it has led around the bulbs i was under the impression that something was at fault This weekend i will try to fit a new throttle body as i have problems with that Thanks again Dale
  17. I will give this a go thanks Gareth
  18. Hi When I put my lights on my rear lights light up including the break lights and the fog lights, now I know this is not normal, I have taken the lenses off and the bulb holders but they seem fine. When i put my foot on the break pedal they do illuminate brighter and the same with the fog lights but the bulbs are all single pole so it doesn't make sense. Has anyone else had the same problem or know how to fix it. Thanks in advance Dale
  19. Hi Gareth Thankyou and certainly will go through the wiring in the boo/tailgate Dale
  20. Thankyou Steve, I believe you are very correct, as I say , I removed those modules and the front fogs still are active as cornering lights which leads me to wonder what the hell were those things actually doing, also still have no joy resolving the rear lights but i won't give up, thanks again Dale
  21. Hi Steve I checked the fog light bulbs and all seem to be working as normal, just cannot get my head around it When then modules were on the front fogs they were working when i turned the steering wheel or indicated so i know the bulbs work there but when i took the modules off i get no front fogs at all 🤷‍♂️
  22. Hi Steve, I haven't looked at those yet but will do and I'll let you know. Thanks mate Dale
  23. Hi all I'm new to this forum, my name is Dale and I recently purchased an A3 Sline 2009, the problem i have is that when I put my lights on, even in DRL mode, my brake lights are on, albeit when I put my foot on the brake, the break lights do glow even brighter and the same with my rear fog lights although they are all single pole bulbs 😫🤔, my front headlights are on in DRL mode also, the person i brought it from had modules fitted so that when you put the indicator on or turned the steering wheel that particular side fog lamp would light up, I removed the modules and now i have no front fog lamps at all, although when the modules were fitted i still had no front fog lamps when i switched them on, ive taken the rear lights out and can see no alterations to the wiring whatsoever, its becoming a real head scratcher, can anyone help Many thanks in advance Dale
×
×
  • Create New...

Forums


News


Membership


  • Insurance
  • Support