Search the Community

Hi everyone, I have Audi Q8 2018 and it has an issue with the A/C Flaps. In the last days when the A/C is on there is no air coming from the front vents, but only in from the rear ones. If I stop the A/C, air is coming from front & rear. I have checked my car with obd and got the following issue.B109207 - Recirculation Flap Motor, Mechanical Malfunction. Anyone able to give guide/manual for replacing that part ? Part number: 4M0820511A I have paid for erwin, but unfortunately didn’t find any manual for replacing that part. Thanks in advance.

Hi new to this page, I've tried searching round but can't find any page with the same problem. I have a 2008 Audi A3 8P, When I put the window up on the driver side it will go all the way up and then stop because the glass has reached the top but the switch continues to make a clicking noise until i press the button for it to go down lightly. Has anyone fixed this issue before and what was the solution? I'm not sure how the regulator works

Hi guys, I'm trying to source a starter motor for my A3 Sportback BKD 2.0tdi 140bhp 2006. Having taken my current one off to count its teeth and check its model, I can confirm it has an 11 tooth count and is Valeo branded. Please see attached photos for evidence of current starter. Eurocarparts suggest that there are 4 different brands and two different fitment types for this vehicle. Unfortunately, none of these match what I currently have. The following starters are available on eurocarparts: Fitment 1 RTX: 10 teeth ,1,7 KW Hella: 10 teeth ,1,7 KW Bosch: 10 teeth ,1,7 KW Fitment 2 RTX: 12 teeth, 2 KW Lucas: 12 teeth, 2 KW All models offered have the same flange & lengths in mm. Could anyone shed any light on which to buy? I'm limited to buying a factory refurbished one rather than from a breakers. Cheers.

Hi guys, Newbie post so please bare with me in case I miss anything.. :) I have a 2004 (54) A3 2.0 BKD. The other day I went to put the drivers window UP and I heard a horrible snapping noise, after taking the door apart I could see that one of the cables going into the mechanism driven by the motor had snapped and as a consequence, the cabling around the mechanism (driven by the motor) was twisted etc. Now, they annoying part... I got a brand new window regulator from Euro (at the cost of £55 @ trade price) and proceeded to fit the item after taking the door apart AGAIN, making sure the part was fitted exactly how the original was! Put it all back together again, moved the window up and then down and BOOM..Snpapped again, at the exact same point. Has anyone ever heard of a similar issue? The motor seems fine as far as I can tell (having plugged the window switches in and tested it; the motor spins freely but does not stop unless you let your finger off the button - I presume the motor hits the resistance and stops when the window is fully down/up) Just want to get an idea of what I am up against here before shelling out any more money (for it to just do the same thing). PS: The window does slide up and down in the runners but is a little tough (I have to use both hands either side of the glass). I have attached a few photos that I have. The yellow coated regulator wires are part of the new regulator, the old one is pictured on the floor) Thanks in advance :)

hi there i have just gotten a A4 3.0L cabi on a 52 plate i have noticed that the passanger side back rest will not move but all the other motors in that chair work any ideas or will it be the motor? and help whould be great cheers