Search the Community

Just thought I would share my most recent upgrade to my 2012 B8.5 A5 Coupe. managed to find an RS5 grey boot lid with integrated spoiler form a breakers yard. Got the boot lid, liner and spoiler module for £280 Frustratingly they had chopped the wires near the module so bought the connector from eBay. Along with the centre console spoiler switch and finally the electrical plug for that switch. installing the boot lid was quite simple requiring very little adjustment. wired and spliced in where necessary after getting two quotes at nearly £1K to paint the boot lid I decided to do it myself with rattle cans. I sanded it down.. well keyed up the surface - primed it, painted and lacquered it. Followed by plenty of sanding and polishing. Coded the spoiler to the car with an OBDEleven - what an awesome tool that is!! Gotta say.. I really like the end result. Comes up and down automatically at the relevant speeds too.

Help it helps, still trying to do a few myself and cant for the life of me get the dip on back up on my a1 to work 🙂 says i need pro Horn When UnLocked Select Control unit 09 (Central Electrics) Control unit Long Coding Byte 5 Bit 4 Activate Activation of Audi Parking System Select Control unit 10 (parking aid) Control unit access authorization - Select function 16 Access Code 71679 Control unit coding -> Seçim function 07 Byte 0 Bit 2-3 (08 visual display active (BAP NEW) selection) Adaptation Select "Visual display for park assist" New Value: OPS Display Shot Down Warning Tone for Parking System Select Control unit 10 (parking aid 2) Adaptation Select "Park Assist activation tone" New Value:off (default: on) Park Assist Activation Speed Limit Select Control unit 10 (parking aid 2) Adaptation Select "Switch-off speed of parking assist" New Value: Choose value between 0 km/h - 20 km/h (default: 10 km/h) MMI Music Sound Reduction with the Parking System Select Control unit 10 (parking aid 2) Adaptation Select "Audio reduction request" New Value:on (default: off) Parking System Varning Tone Frequency-Front Select Control unit 10 (parking aid 2) Adaptation Select "Speaker frequency for the front Park Assist" Select Value Between "Stage 1- Stage 9" Parking System Varning Tone Frequency-Rear Select Control unit 10 (parking aid 2) Adaptation Select "Speaker frequency for the rear Park Assist" Select Value Between "Stage 1- Stage 9" Start/Stop Activation-Deactivation on FIS Select Control unit 17 (Dashboard) Adaptation Warning light for Start / Stop Value to "off" position (default: on) Seat Belt Warning Select Control unit 17 (Dashboard) Adaptation Select "Deactivate seat belt warning" New Value "yes" (Default: no) Hill Hold Assist Activation Select Control unit 03 (brake / ABS) Control unit coding Byte 16 and Bit 0 Activate Adaptation Select Berganfahrhilfe Adjustment: 0 = Berganfahrhilfe "Normal" 1 = Berganfahrhilfe "Early" 2 = Berganfahrhilfe "Late" Pointer Test Select Control unit 17 (Dashboard) Adaptation Select Channel "Staging" New Value:Active Adjust Consumption Indıcator Select Control unit 17 (Dashboard) Adaptation Customize consumption indicator Basic Değeri 100 Value change 85 (%) and 115 (%) . Enable Mirror Heating Select Control unit 52 (Türelektr. Beifahr.) Control unit Long Coding Byte 04 Bit 0 Deactivate Select Control unit 42 (Türelektr. Driver) Control unit Long Coding Byte 04 Bit 0 Deactivate Folding Mirror when Doors Lock Select Control unit 42 (door Electrical driver) Control unit Long Coding Byte 4 Bit 6 Activate Control unit 52 (door Electrical front passenger) Control unit Long Coding Byte 4 Bit 6 Activate Activation of Headlight Wash Select Control unit 09 (Central Electrics) Control unit Long Coding Byte 20 Bit 5 DeActivate Rain Lighting Select Control unit 09 (Central Electrics) Control unit Long Coding Subsystem: Select RLS (rain and light sensor) Byte 0 Bit 1 DeActivate Activation of Tire Pressure System Select Control unit 03 (ABS / brake control unit) Control unit Long Coding Byte 16 Bit 1 Activate Emergency Break/Flashing Lights Select Control unit 09 (Central Electrics) Control unit Long Coding Byte 16 Bit 1 Activate Bit 2 Activate Enable-Disable DLR on MMI Select Control unit 09 (Central Electrics) Control unit Long Coding Byte 15 Bit 7 Activate-This is a hidden bit. You have to direct edit. Disable DRL with Hand Break Select Control unit 09 (Central Electrics) Control unit Long Coding Byte 11 Bit 0 Activate-This is a hidden bit. You have to direct edit.

Hi, I have a 2016 Audi a3. I have recently installed a new battery myself to replace my old one. I saw on online forums that new batteries need to be coded for the car to recognize them and adapt the charging cycle/level accordingly. It seems to me that the most appropriate way to enter the new battery details is through obdeleven Pro. The issue is that I would want to avoid paying for the unit which costs more than the battery itself, especially that I hardly drive my car 1000 miles per year. Can someone kindly advise if they know of a cheaper way to apply the coding than buying the obdeleven Pro unit? Thanks